Tag Archives: ANSI/AGSC/AGRSS™ Standard 003-2015

TODAY’S BLOG: Part 7: ANSI/AGSC/AGRSS™ Standard 003-2015 Changes

“The last of the changes to the ANSI/AGSC/AGRSS™ Standard 003-2015 is, in my opinion, the most important. Without education and training a technician doesn’t know how to do the job right and will be unable to follow a standard that doesn’t make sense to him.” —Bob Beranek

Continue reading

Posted in glassBYTEs Headlines | Tagged , , , , , , | Leave a comment

TODAY’S BLOG: Part 6: ANSI/AGSC/AGRSS™ Standard 003-2015 Changes

“Part six in our series of the ANSI/AGSC/AGRSS™ Standard 003-2015 changes for 2015 fall under the ‘additional requirements’ heading.” —Bob Beranek

Continue reading

Posted in Linked Story | Tagged , , , , , , | Leave a comment

ANSI Committees Slated to Meet at Auto Glass Week™: Including Windshield Quality, Other

A number of ANSI committee meetings will be held just prior to Auto Glass Week™ 2015 on September 28 to 29, 2015. One of these meetings will address the development of a new American National Standards Institute (ANSI) standard that relates to the identification in quality differences of windshields.

Continue reading

Posted in glassBYTEs Original Story | Tagged , , , , , , , , , , , , , , , , , , | 1 Comment

TODAY’S BLOG: Part 5: ANSI/AGSC/AGRSS™ Standard 003-2015 Changes

“The gasket (weatherstrip) installation is quickly becoming a thing of the past. However, there are a few gasket sets still out there. The vehicles they are mounted in are being used every day to transport families and friends. The ANSI/AGSC/AGRSS™ Standard 003-2015 is written to cover all vehicles with safety glass mounting, no matter what kind.”—Bob Beranek

Continue reading

Posted in Linked Story | Tagged , , , , | Leave a comment

TODAY’S BLOG: Part 4: ANSI/AGSC/AGRSS™ Standard 003-2015 Changes

Part four in our series of ANSI/AGSC/AGRSS™ Standard 003-2015 changes is related to adhesives and their importance to the safety of the installation.

Continue reading

Posted in Linked Story | Tagged , , , , , , | Leave a comment

TODAY’S BLOG: Part 3: ANSI/AGSC/AGRSS™ Standard 003-2015 Changes

“The next series of changes for the new ANSI/AGSC/AGRSS™ Standard 003-2015 standard is under the 5.0 heading ‘Selection of Glass and Retention Systems’ which falls under the Product Performance part of our scope.” —Bob Beranek

Continue reading

Posted in Linked Story | Tagged , , , , , , | Leave a comment

TODAY’S BLOG: Part 2: The New ANSI/AGSC/AGRSS™ Standard 003-2015

“One part of the newly published ANSI/AGSC/AGRSS™ Standard 003-2015 remains the same as the prior version. It is so important that I call it the ‘Golden Rule’ of the Standard.” —Bob Beranek

Continue reading

Posted in Linked Story | Tagged , , , , , | Leave a comment

TODAY’S BLOG: The New ANSI/AGSC/AGRSS™ Standard 003-2015

“As many of you already know, the ANSI/AGSC/AGRSS™ Standard 003-2015 has been revised and edited to meet the new issues that affect our industry. The official new name is ANSI/AGSC/AGRSS™ Standard 003-2015. The 003 is the third version accepted by the American National Standards Institute (ANSI) and 2015 is the year it was accepted and published.” —Bob Beranek

Continue reading

Posted in Linked Story | Tagged , , , , , | Leave a comment